WIDOS Einsteinstr. 5 Phone +49 7152 9939 0
Wilhelm Dommer Söhne D-71254 Ditzingen Fax +49 7152 9939 40
GmbH E-mail: info@widos.de Webside: www.widos.de
30.08.19 Working Instructions WIDOS 4600 Page 10 of 32
2. Safety Rules
The base for the safe handling and the fault-free operation of this machine is the knowledge
of the basic safety indications and rules.
The safety indications of this chapter represent the general part.
Particular information is listed directly before the corresponding actions are described.
These working instructions contain the most important information to run the machine safely.
The safety information must be read by all persons working on the machine.
2.1. Explanation of the Symbols and Indications
In the working instructions, following denominations and signs are used for dangers:
This symbol means a possible danger for the life and the health of persons.
The non-respect of these indications may have heavy consequences for the health.
This symbol means a possible dangerous situation.
The non-respect of these indications may cause light injuries or damages on goods.
This symbol means a possible dangerous situation by moving parts of the machine
The disrespect of these indications may cause heavy crushings of parts of the body
resp. damages of parts of the machine.
This symbol means a possible dangerous situation due to hot surfaces.
The disrespect of these indications may conduct to heavy burns,
respectively to self-ignition or even fire.
This symbol gives important information for the proper use of the machine.
The non-respect of these indications may conduct to misfunctions and damages on
the machine or on goods in the surrounding.
Under this symbol you get user tips and particularly useful information.
It is a help for using all the functions on your machine in an optimal way and helps you
to make the work easier.
The regulations for the prevention of accidents are valid (UVV).
To Next Page
