EasyManua.ls Logo

widos 4600 - WIDOS 4900 Set Composition; WI-PRECISION Basic Machine; WI-FORCE Hydraulic Unit; WI-CUTTING Planer

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Rules Chapter 2
30.08.19 Working Instructions WIDOS 4600 Page 14 of 32
2.11.3 Danger of Stumbling over Hydraulic and Electric Wires
Make sure that no person has to step over the wires.
Lay the wires in such a way that the danger is kept to a minimum.
2.11.4 Danger of Squeezing by Clamping Devices and Guideways
There is the danger of serious injuries:
on the one hand between the inner clamping devices and on the other hand between the
outer clamping device and the end of the guideway.
Do not stand or put hands between clamped pipe ends.
Do not stand or put hands between the inner clamping devices with not yet clamped pipes.
Do not block opening and closing of the machine slides.
2.12. Structural Modifications on the Machine
No modifications, extensions or reconstructions may be made on the machine without permission
of the manufacturer.
Machine parts which are not in a perfect condition are to be replaced immediately.
Only use original WIDOS spare and wear parts.
In case of purchase orders please always state the machine number.
2.13. Cleaning the Machine
The used materials and tissues are to be handled and disposed of properly, especially:
when cleaning with solvents
when lubricating with oil and grease
2.14. Warranty and Liability
Fundamentally our "General Sales and Delivery Conditions" are valid.
They are at the owner's disposal latest when signing the contract.
Guarantee and liability demands referring to personal injuries or damages on objects are
excluded if
they are caused by one or several of the following reasons:
not using the machine according to the prescriptions
inexpert transport, mounting, starting, operating and maintenance of the machine
running the machine with defective or not orderly mounted safety appliances
ignoring the information given in this manual
structural modifications on the machine without permission
unsatisfactory checking of parts of the machine, which are worn out
repairs performed in an inexpert way
in case of catastrophes and force majeure.

Table of Contents

Other manuals for widos 4600