widos 4600 - 8 Transport

WIDOS Einsteinstr. 5 Phone +49 7152 9939 0
Wilhelm Dommer Söhne D-71254 Ditzingen Fax +49 7152 9939 40
GmbH E-mail: info@widos.de Webside: www.widos.de
30.08.19 Working Instructions WIDOS 4600 Page 27 of 32
8. Transport
The machine can be transported in two transport boxes or in one packing box.
One transport box contains the basic machine, the aggregate and the reception box with planer and
heating element, the other box contains the reduction inserts.
 In each box holders are included which are suitable for each single component in order to avoid
slipping
 Put the components into the box in such a way that they are fitting in the holders.
 The hydraulic hoses at the basic machine should not be unscrewed (air penetration).
 Make sure that they are not squeezed.
 Handle the machine carefully.
 Do not tilt the aggregate too much. Otherwise there is the danger that oil may come out.
 Protect from heavy shocks and impacts.
 Make sure that the box cover is closed correctly.
 During the construction of the transport box a stress was put on a light-weight construction.
 Take much care when using automatic handling and carrying machines.
During the transport of the machine there may be cold weldings between the piston rod
and the eyes of the planer housing. These spots on the piston rod may damage the
sealing.
 Therefore the eyes must be lubricated with PTFE-spray before each transport!