widos 4600 - Dangers Caused by the Hydraulics; Special Dangers; Danger of Catching Clothes by the Planer; Danger of Being Burnt by Heating Element, Reception Box and Welding Area

Safety Rules Chapter 2
30.08.19 Working Instructions WIDOS 4600 Page 13 of 32
2.10. Dangers Caused by the Hydraulics
System parts and pressure hoses should be made pressureless before beginning of
any repair works. Even if the machine is switched off, pressure may be in the
hydraulic accumulator!
 There is the danger of injuring the eyes by hydraulic oil squirting out
 Damaged hydraulic hoses have to be immediately replaced.
 Make a visual inspection of the hydraulic hoses before each work beginning.
 The hydraulic oil is inedible !
2.11. Special Dangers
2.11.1 Danger of Catching Clothes by the Planer
There is the danger of cutting yourself or even breaking bones !
 Only wear clothes tight to the body.
 Do not wear rings or jewellery during work.
 If necessary, wear a hair-net.
 Always put the planer back into the reception box after and before each use.
 Transport the planer at the handle only.
 Do not touch the planer surfaces.
 Switch the planer on only for usage. Otherwise the planer will start every time when the security
microswitch is pressed.
2.11.2 Danger of being burnt by Heating Element, Reception Box and Welding
Area
You can burn yourself, inflammable materials can be ignited!
The heating element temperature is heated up to more than 200° C!
 Do not touch the surfaces of the heating element.
 Do not leave the heating element unsupervised.
 Take enough safety distance to inflammable materials.
 Wear safety gloves.
 Always put the heating element back into the reception box after and before each use.
 Transport the heating element at the handle only.