widos MAXIPLAST - Obligations of the user; Measure of organisation; Information about safety precautions; Instructions for the staff

Safety rules Chapter 2
Chapter 2Chapter 2
Chapter 2
16.05.17 Working Instructions WIDOS MAXIPLAST Page 11 of 41
2.3.
2.3.2.3.
2.3. Obligations of the user
Obligations of the userObligations of the user
Obligations of the user
All persons who are to work at the machine are obliged:
• to follow the basic safety and accident protection rules,
• to have read and understood the safety chapter and the warnings in this manual and to confirm by
their signature that they have well understood them,
• to inform themselves about the functions of the machine before using it, before working.
2.4.
2.4.2.4.
2.4. Measure of organisation
Measure of organisationMeasure of organisation
Measure of organisation
• All equipment required for personal safety is to be provided by the owner.
• All available safety equipment is to be inspected regularly.
2.5.
2.5.2.5.
2.5. Information about safety precautions
Information about safety precautionsInformation about safety precautions
Information about safety precautions
• The working instructions have to be permanently kept at the place of use of the machine. They are
to be at the operator's disposal at any time and without much effort.
• In addition to the manual, the common valid and the local accident protection rules and regulations
for the environmental protection must be available and followed.
• All safety and danger indications on the machine have to be in a clear readable condition.
• Every time the machine changes hands or is being rent by a third person, the working instructions
are to be sent along with and their importance is to be emphasized.
2.6.
2.6.2.6.
2.6. Instructions for the staff
Instructions for the staffInstructions for the staff
Instructions for the staff
• Only skilled and trained persons are allowed to work at the machine.
• It must be clearly defined who is responsible for transport, mounting and dismounting, and starting
the operation.
• A person who is being trained may only work at the machine under supervision of an experienced
person.
2.7.
2.7.2.7.
2.7. Structural modifications on the machine
Structural modifications on the machineStructural modifications on the machine
Structural modifications on the machine
• No modifications, extensions or reconstructions may be made on the machine without permission
of the manufacturer (look chapter 2.11. In cases of non-compliance, any guarantee and
liabilitydemands expire.
• Machine parts which are not in a perfect condition are to be replaced immediately.
• Only use original WIDOS
WIDOSWIDOS
WIDOS spare and wear parts.
• In case of purchase orders please always state the machine
machinemachine
machine number
numbernumber
number and version number!
and version number!and version number!
and version number!