widos MAXIPLAST - Equipment and accessories:

Description of product Chapter 1
Chapter 1Chapter 1
Chapter 1
16.05.17 Working Instructions WIDOS MAXIPLAST Page 9 of 41
1.6.
1.6.1.6.
1.6. Equipment and accessories:
Equipment and accessories:Equipment and accessories:
Equipment and accessories:
Following accessories are part of the delivery:
1 set Fitting clamping tool (optional)
1 Allan key with T-grip size 3 for screwing in / out the reduction inserts
1 Allan key with T-grip size 4 for tightening the optional clamping jaws for fittings
1 Allan key tilted size 5 for tightening the pipe support
1 Torx-screwdriver T10
Screws for reduction inserts, flat-head screws for reduction inserts, flat-head
screws for mounting the optional clamping jaws for fittings