widos MAXIPLAST - Elements for operating the machine; Elements on the basic machine; table support

WIDOS
WIDOSWIDOS
WIDOS Einsteinstr. 5 Phone +49 7152 9939 0
Wilhelm Dommer Söhne D-71254 Ditzingen Fax +49 7152 9939 40
GmbH E-mail: info@widos.de Webside: www.widos.de
16.05.17 Working Instructions WIDOS MAXIPLAST Page 15 of 41
4.
4.4.
4. Elements for operating the machine
Elements for operating the machineElements for operating the machine
Elements for operating the machine
4.1.
4.1.4.1.
4.1. Elements on the basic machine / table support
Elements on the basic machine / table supportElements on the basic machine / table support
Elements on the basic machine / table support
No.
No.No.
No. Denomination
DenominationDenomination
Denomination Function
FunctionFunction
Function
1 Tightening nut - tightening of the pipes
2 Lever for horizontal offset (2x) - by loosening the levers the clamping tool can
be moved upwards and downwards on the
wedge
3 Clamping lever (4x) - adjustment of the angle
4 Guide bar above - guidance for the support
5 Star grip - fixing the support
6 Scale - display of the actual welding force
- max. 120 kp
7 Handwheel - Driving the support forward / backward
- application of the bead-up force
8 Star grip for basic machine - tightening the basic machine at the table
support.
9 Spindle - advance for support
10 Guide bar below - guidance for the support
- fixing the planer
- rest for the heating element
1
4
3
2
5
6
7
8
9
10