WIKA CPH6200 - Interface and Analogue Output Connectors

13WIKA operating instructions, model CPH6200
EN
11221780.03 07/2022 EN/DE
The female connectors for the connection of the interface can also be used for the
function of analogue output. For this, a corresponding analogue connection cable must
be used.
The “interface” or “analogue output” operating mode must be configured via
menu and affects battery life!
1
Interface connector or optional analogue output
2
Pressure connection channel 1 (only with CPH6200-S1)
3
Pressure connection channel 2 (only with CPH6200-S2)
4
Pressure connection channel 1 (only with CPH6200-S2)
5
Connection of power supply unit for voltage supply
Side view
(left)
5
12
134
Model CPH6200-S1
Model CPH6200-S2
4. Design and function