WIKA CPH6200 - 10. Specifications; CPH6200 Digital Indicator Specifications

38 WIKA operating instructions, model CPH6200
EN
11221780.03 07/2022 EN/DE
10. Specifications
10. Specifications
10.1 Digital indicator model CPH6200
Digital indicator model CPH6200
Electrical connection for reference pressure sensor
Measuring inputs
■
1 input for CPH6200-S1
■
2 inputs for CPH6200-S2
Sensor compatibility Compatible with reference pressure sensor model CPT6200
Connection to CPH6200 6-pin, shielded mini DIN female connector with interlocking
Sensor connection cable
■
Cable with 6-pin mini DIN connector and 7-pin bayonet
connector, length 1.1 m [3.3 ft]
■
Extension cable, length 3.8 m [12.5 ft], overall cable length
approx. 5 m [16.4 ft]
Display
Display indication Large 4 ½-digit LC display for indication of two pressure values
and additional information
Indication range -19999 ... 19999 digits (dependent upon connected reference
pressure sensor)
Pressure types Dependent upon connected reference pressure sensor
■
Gauge pressure, absolute pressure or vacuum
■
Differential pressure measurement only with CPH6200-S2, and
two model CPT6200 reference pressure sensors connected
Pressure units Freely adjustable depending on the measuring range
■
bar
■
mbar
■
psi
■
Pa
■
kPa
■
MPa
■
mmHg
■
inHg
Functions
Measuring rate Measuring rate (can be set via menu)
■
4/s (“Slo” - slow measurement)
■
1,000/s filtered (“FASt” - fast measurement)
■
> 1,000/s unfiltered (“P.det” - peak value detection)
Mean value filter 1 ... 120 seconds (can be set via menu)
Data logger
■
Individual value logger
⇒
Up to 99 recordings incl. time via button press
■
Cyclic logger
⇒
Automatic recording of up to 10,000 values incl. time
⇒
Cycle time freely adjustable in the range from
1 ... 3,600 seconds
Real-time clock For data logger, (can be set via menu)
Min./Max. memory Minimum or maximum measured value (can be accessed via
function button)