35WIKA operating instructions, model CPH6200
EN
11221780.03 07/2022 EN/DE
8.3 Cleaning
CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property and
the environment. Residual media in the dismounted instrument can result in a
risk to persons, the environment and equipment.
▶
Wear the requisite protective equipment.
▶
Carry out the cleaning process as described below.
1. Prior to cleaning, isolate the instrument properly from the pressure source and switch
it off.
2. Clean the instrument with a moist cloth.
Electrical connections must not come into contact with moisture!
CAUTION!
Damage to the instrument
Improper cleaning may lead to damage to the instrument!
▶
Do not use any aggressive cleaning agents.
▶
Do not use any hard or pointed objects for cleaning.
3. Flush or clean the instrument, in order to protect persons and the environment from
damage through residual media.
8.4 Recalibration
DAkkS certificate - official certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with
time intervals of approx. 12 months. The settings will be corrected if necessary.
8. Maintenance, cleaning and recalibration
To Next Page
Loading...
Need help?
General
