Name: WIKA S-20
Brand: WIKA
Rating: 4 (1 reviews)

To Next Page

To Previous Page

14 WIKA operating instructions pressure transmitter, model S-20

14043170.01 04/2013 GB/D/F/E

5. Transport, packaging and storage

5.1 Transport

Check the pressure transmitter for any damage that may have been caused during transportation.

Obvious damage must be reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g. change in installation site, sending for

repair).

5.3 Storage

Permissible conditions at the place of storage:

■

Storage temperature: -40 ... +70 °C

■

Humidity: 67 % relative humidity (no condensation)

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

■

Humid or wet environment

■

Potentially explosive environments, ammable atmospheres

Store the pressure transmitter in its original packaging in a location that fulls the conditions listed above.

WARNING!

Before storing the instrument (following operation), remove any residual media. This is of particular

importance if the medium is hazardous to health, e.g. caustic, toxic, carcinogenic, radioactive, etc.

5. Transport, packaging and storage

Questions and Answers:

Need help?

Do you have a question about the WIKA S-20 and is the answer not in the manual?

WIKA S-20 Specifications

General