EN
14139245.01 12/2015 EN/DE
WIKA operating instructions model T1522
6. Configuration software WIKAsoft-TT
For installation please follow the instructions of the installation routine.
6.1 Starting the software
Start the configuration software by double-clicking on the WIKAsoft-TT icon.
After starting the software, the language must
first be set, via the selection of the appropriate
country's flag.
The selection of the COM port is made
automatically.
After the connection of a transmitter (using the
PU-448), on pressing the “Start” button, the
configuration interface is loaded.
The configuration interface can only be loaded when an instrument is
connected.
6. Configuration software WIKAsoft-TT
To Next Page
Loading...
