If you are using an SD card from other cameras, please make sure to format the SD card in your computer prior to
use in your camera. New cards are ok to use straight from the package.
Power
ON:
1. To turn the unit ON press and release the power button.
2. Check the battery level icon to ensure the batteries just installed contain the proper charge level. If so, you are ok
to proceed with camera use.
OFF:
1. To turn the unit off, first wake up the LCD screen and then depress and hold the power button until the LCD turns
off.
Power Save
1. After 30 seconds without any buttons being pushed, the LCD will turn off and camera enters into Power Save or
Ready Mode.
To Next Page
Loading...
