en
Installation and operating instructions • Wilo-Control SC2.0-Booster • Ed.01/2023-09 7
• Store tools at the designated locations.
• After completing work, reattach all safety and monitoring
devices and check that they function properly.
2.6 Operator responsibilities
• Provide installation and operating instructions in a language
which the personnel can understand.
• Make sure that the personnel has had the corresponding train-
ing for the specified work.
• Safety and information signs mounted on the device must al-
ways be legible.
• Train the personnel on how the system operates.
• Eliminate risk from electrical current.
• To ensure safe working practice, define personnel responsibilit-
ies.
Children and persons younger than 16years or with reduced
physical, sensory or mental capacities or limited experience are
prohibited from handling the product! A technician must super-
vise persons younger than 18years!
2.7 Improper use
• The operational reliability of the supplied product is only guar-
anteed for intended use in accordance with chapter4 of the in-
stallation and operating instructions.
• Comply with the limits specified in the catalogue/data sheet.
3 Application/use
3.1 Intended use
The control device is used for automatic, convenient control of pressure-boosting systems
(single- and multi-pump systems):
• Control SC-Booster: uncontrolled fixed-speed pumps
• Control SCe-Booster: electronically controlled variable-speed pumps
The field of application is water supply in residential towers, hotels, hospitals, offices and
industrial buildings. When used in conjunction with suitable pressure transmitters, the
pumps offer low-noise and energy-saving operation. The performance of the pumps is ad-
apted to the constantly changing requirements in the water supply system.
Intended use also includes compliance with this manual. Any other use is regarded as non-
compliant with the intended use.
4 Transportation and storage
4.1 Delivery
• After delivery, check product and packaging for defects (damage, completeness).
• Defects must be noted on the freight documentation.
• Defects must be notified to the transport company or the manufacturer on the day of
receipt of shipment. Claims cannot be asserted if the notification of defects takes place
at a later date.
4.2 Transport
CAUTION
Damage to property due to wet packaging!
Wet packaging may tear. If unprotected, the product may fall on the
ground and be irreparably damaged.
• Carefully lift wet packaging and replace it immediately!
• Clean control device.
• Close housing apertures, ensuring they are sealed watertight.
To Next Page
Loading...
General