Need help?Do you have a question about the Wilo Control SC2.0-Booster and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | SC2.0-Booster |
| Manufacturer | Wilo |
| Shaft Material | Stainless steel |
| Type | Booster |
| Power Supply | 230V, 50Hz |
| Application | Boosting water pressure in domestic and commercial applications |
Instructions are essential for correct handling and use of the product.
Explains how safety instructions are displayed, including signal words and symbols.
Details qualifications required for personnel, including electricians.
Specifies that electrical work must be done by qualified electricians.
Outlines safety precautions for installation and dismantling, including PPE.
Defines responsibilities and outlines improper use cases.
Describes the control device's purpose for automatic pressure-boosting systems.
Caution regarding damage due to incorrect storage, especially moisture and temperature.
Explains device setup and lists main components.
Explains how the smart control system manages pressure-boosting systems.
Describes different operational modes for SC and SCe versions.
Lists technical specifications and explains product identification coding.
Lists items included in delivery and optional accessories.
Details installation methods like frame mounted, floor model, and wall fixation.
Provides a DANGER warning for electrical work and a NOTICE about cable connections.
Details mains connection procedures and how to connect pumps.
Provides instructions and cautions for connecting sensors and communication interfaces.
Covers low water protection, signals, and ModBus TCP connection.
Describes the main switch, LCD display, and their functions.
Explains the initial settings menu and how to navigate the system.
Introduces the main categories within control settings.
Settings for standby modes and setpoint parameters.
Details control modes, PID settings, and monitoring functions.
Introduces additional settings for pump maintenance and the alarms menu.
Explains how to view diagnosis, values, and BMS interfaces.
Covers display settings, language, and the overall menu structure.
Details pump installation, statistics, and CAN fallback settings.
Explains settings for pressure sensors (measuring range, type, response).
Covers frequency converter limits and ramps for speed control.
Information on control device and pump maintenance data.
Provides access to manual sections, faults, and contact information.
Checks before start-up and how to correct motor rotation.
Steps for deactivating automatic mode and temporary/final shutdown.
Procedures for cleaning the control device, fan, and checking contactors.
A table listing error codes, their causes, and remedies.
Information on ordering spare parts.
Guidelines for proper product disposal and recycling.
Notes on maximum switching frequency and system impedance effects.
Explains ModBus data types and lists parameters with their details.
To Next Page