Product description
E:\shares\Baprod\BA\subtec_m\sewage\us\fkt27\product.fm 3-5
the motor shaft. The heat is attained by the cooling flange and the housing parts. This transfers
heat to the pumped fluid and/or the ambient air.
The pump housing must always be completely filled with the pumped fluid.
Name plate
Technical data
Unit
Symbol Name Symbol Name
P-Type Pump type MFY Year of manufacture
M-Type Motor type P Rated power
S/N Machine number F Frequency
Q Pump flow U Rated voltage
H Pump head I Rated current
N Speed I
ST
Starting current
TPF Temperature of pumped fluid SF Service factor
IP Protection class I
SF
Current at service factor
OT Operating mode (s = wet / e = dry) MC Motor wiring
Cos ϕ Cosine phi Max. submersion
IMø / S Impeller diameter/number of levels
Table 3-2: Name plate key
Year of manufacture: 2008
Order no.:: template
Machine number: TMPFKT27
Product description: Wilo-EMU
Pump type: FA...
Version: A
Model: 0
Impeller diameter: - / corrected: -
Downstream device: -
Motor type: FKT27.1...
Version: A
Model: 0
Discharge port: -
Tabelle 3-3:
To Next Page
Loading...
Need help?
General
