Windhager VarioWIN - Page 25

5s
RESET
5s
RESET
Pressing the Yes button resets the boiler cleaning – Fig. 58. The
display shows „Parameter is saved“ for a few seconds (Fig. 59) and
then changes back to the previous level – Fig. 60.
Fig. 58
Fig. 59
Has boiler and
burner cleaning
been performed?
Confirm
– Yes Back +
Parameter is
saved
.....
(Animated symbol)
Operation
25
The menu item or sub-menu item is exited by pressing the Back
button (Fig. 60) or after a delay of 45 seconds.
5s
RESET
Fig. 60
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash comp.
Choose Back