2.10.2 Service level
System parameters, start-up and the actuator test can be display-
ed, performed and/or modified in the service level.
Fig. 115
Fig. 114
Changes in the service level may be performed only by trai-
ned service personnel (for setting instructions, see the
VarioWIN „Assembly instructions“).
Fig. 116
The menu item or sub-menu item is exited by pressing the
Back
but-
ton (Fig. 116) or after a delay of 45 seconds.
Operator level
Service level
Choose Back
Service level only
for trained
service personnel
5 s
Parameters
Start-up
Actuator test
Choose Back
To Next Page
Loading...
