Windhager VarioWIN - Page 27

27
5s
RESET
5s
RESET
5s
RESET
Fig. 66
Operation
Save the changed time by pressing the Yes button – Fig. 66. The
display shows „Parameter is saved“ for a few seconds (Fig. 67) and
then changes back to the previous level – Fig. 68.
Fig. 67
Fig. 68
Parameter is
saved
.....
(Animated symbol)
Set time
Save
– Yes No +
13:50
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash comp.
Choose Back
The menu item or sub-menu item is exited by pressing the Back
button (Fig. 68) or after a delay of 45 seconds.