Windhager VarioWIN - Page 33

33
5s
RESET
The menu item or sub-menu item is exited by pressing the Back
button (Fig. 92) or after a delay of 45 seconds.
Operation
Fig. 92
Feed
enable time
Start 07:00
End 22:00
Choose Back
5s
RESET
„without time control“ or „switched off“
No setting is possible here in the „Time profile feed“ menu item if
the „without time control“ or „switched off“ setting is active in the
„Feed operating mode“ menu item (see section 2.10.1.3) – Fig. 94.
The menu item or sub-menu item is exited by pressing the
Back
button (Fig. 94) or after a delay of 45 seconds.
Fig. 94
Feed without
time control or
switched off
Back
5s
RESET
Fig. 93
The menu item or sub-menu item is exited by pressing the Back
button (Fig. 93) or after a delay of 45 seconds.
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash comp.
Choose Back