MAINTENANCE
86037580 GLIDE 01/03/07
4-17
SERVICE SCHEDULE
MAINTENANCE BEFORE EACH
WORK PERIOD
AFTER EACH
WORK PERIOD
50
HRS
100
HRS
200
HRS
Check water level of batteries after charging;
add distilled water if necessary
*
Check that recovery tank cover seals tightly
*
Visually check for damaged or worn tires
*
Check brushes or pads for proper installation
*
Check vacuum hose connections
*
Check that squeegee is securely attached
and properly adjusted
*
Check that side squeegees are properly
adjusted
*
Check for securely attached drain hose, plug
and caps
*
Check brakes and steering for proper
operation
*
Inspect vacuum filter for debris
*
Clean out solution tank and filter, check flow
*
Run vacuum motors to dry
*
Clean brushes or pads and check wear
*
Clean main and side squeegee blades and
check wear
*
Clean out recovery tank and vacuum filter
*
Clean and inspect float shutoff
*
Clean outside of tanks, check for damage
*
Store with covers off tanks
*
Charge batteries
*
Check side squeegee for wear
*
Clean off top of batteries
*
Check battery cells with hydrometer
*
Inspect scrub deck skirts
*
Clean solution strainers
*
Check battery connections are tight
*
Clean battery cases and battery
compartment
*
Check parking brake adjustment
*
Check brakes discs and calipers for damage
or wear
*
Clean pivot points on squeegee and scrub
deck
*
Check all motors for carbon brush wear
*
Check motor commutators
*
Check steering chain tensioner
*
NOTE: Traction drive, wheels and batteries should be serviced based on traction drive hour meter. The
scrub brush hour meter should be used for all other service schedule items.
To Next Page
Loading...
Need help?
General