WinGD X72DF - Arrangement of Vertical Lubricating Oil Drains for 6-Cylinder Engines

Marine Installation Manual 2021-08 4-29
4 Ancillary Systems
4.3 Lubricating oil systems
X72DF
Arrangement of vertical
lubricating oil drains
Figure 4-15 Arrangement of vertical lubricating oil drains for 6-cylinder engines
Inclination angles
NOTE
The illustration above does not necessarily represent the actual config-
uration or the stage of development, nor the type of the engine con-
cerned.
For all relevant and prevailing information see MIDS drawings,  4-17.
SM-0038
1
2
3
4
5
6
*2)
*1) *1)
Driving end
Free end
Proposal to determine final position in accordance with shipyard
*1)
Alternatively the oil drains may also be arranged symmetrically on
port/fuel pump side.
*2)
Athwartships and fore-and-aft inclinations may occur simultaneously.
Trim (static) and pitching (dynamic)
Heel (static)
Rolling (dynamic)
SM-0065