WinGD WARTSILA RT-flex58T-E User Manual

RT-flex58T-E
Maintenance Manual
“Marine”
Vessel:
Type:
Engine No.:
Document ID: DBAC540648
Winterthur Gas & Diesel Ltd. 24hrs Support:
Schützenstrasse 1−3 Wärtsilä Services Switzerland Ltd.
CH-8400 Winterthur Zürcherstrasse 12
Switzerland CH 8400 Winterthur
Switzerland
+41 52 262 80 10
technicalsupport.chts@wartsila.com

WinGD WARTSILA RT-flex58T-E Specifications

General

Brand	WinGD
Model	WARTSILA RT-flex58T-E
Category	Engine
Language	English

Summary

General Information (Group 0)

For Particular Attention

Manual is confidential; intellectual property remains with Wärtsilä.

Safety Measures and Warnings

Covers general safety, precautionary measures, special measures, and recommendations for performing work.

Clearance Table

Lists clearances for various engine components.

Tightening Values

Details tightening values for various screwed connections on engine components.

Maintenance Schedule: Inspection and Overhaul Intervals (Guidelines)

Provides inspection and overhaul intervals for engine components.

Bedplate and Tie Rod (Group 1)

Main Bearing

Thrust Bearing

Cylinder Liner and Cylinder Cover (Group 2)

Crankshaft, Connecting Rod and Piston (Group 3)

Piston

Piston Rings

Supply Unit, Injection and Exhaust Valve Control (Group 5)

Fuel Pump: Dismantling and Assembling

Procedures for dismantling and assembling the fuel pump.

Injection Control Unit: Removal and Fitting

Steps for removing and fitting the injection control unit.

Crank Angle Sensor Unit, Tools (Group 9)

Crank Angle Sensor Unit: Dismantling, Assembling and Adjusting

Procedures for dismantling, assembling, and adjusting the crank angle sensor unit.

Hydraulic Pre-tensioning Jacks