Winix ZERO 4 User Manual

USER MANUAL WINIX ZERO 4 AIR PURIFIER
Page 10
Auto Mode
Enables auto operation based on the unit’s air quality Particle Sensor.
1. Press the Mode button to select Auto mode.
• The LED ‘Auto’ light will indicate when Auto mode
is activated, and operation will begin.
NOTE : When in Auto mode the fan speed is automatically adjusted according to the indoor air quality. As the
indoor air quality improves, the fan speed will automatically be reduced. If the indoor air quality decreases, the
fan speed will automatically increase.
Sleep Mode
1. Press the Mode button to select Sleep mode.
• The LED ‘Sleep’ light will indicate when Sleep
mode is activated, and operation will begin.
NOTE :
• When Sleep mode is selected, the fan speed is automatically set to Low. The fan speed can be manually
changed by pressing the Fan Speed button, changing the unit into manual mode.
• When Sleep Mode is activated, the Air Quality Indicator LED light is disabled.
AUTO & SLEEP

Winix ZERO 4 Specifications

General

Brand	Winix
Model	ZERO 4
Category	Air Cleaner
Language	English