Winix ZERO 4 User Manual

USER MANUAL WINIX ZERO 4 AIR PURIFIER
Page 4
Air Outlet Vent
Reset Button
press the RESET button
for at least 5 seconds.
Fan Speed Indicator
Indicates the
current fan speed.
Timer Indicator
If timer has been set, the
LED light indicates the set
time of operation.
Air Quality Indicator
Color-coded LED indicates one of
three levels of air quality.
Mode Button
Press to cycle through and set
the desired mode of operation
(Auto, Sleep).
Fan Speed Button
Enables Manual operation of the
unit. Press to cycle through and
set the desired fan speed (Low,
Medium, High, Turbo).
Light Sensor
Detects the
amount of
ambient light
within the
environment,
to adjust the
brightness
of the LED
indicators.
Timer Button
Press to cycle
through and set
desired length of
operation (1hr,
4hr, 8hr,[NO
TIMER])
Change Filter Indicator
LED light indicates when it is
PlasmaWave Indicator
Indicates whether
PlasmaWave is enabled or
disabled.
PlasmaWave Button
Enables or disables
PlasmaWave .
Power Button
Turns the unit on
CONTROLS

Winix ZERO 4 Specifications

General

Brand	Winix
Model	ZERO 4
Category	Air Cleaner
Language	English