USER MANUAL WINIX ZERO 4 AIR PURIFIER
Page 19
FREQUENTLY ASKED QUESTIONS
Problem Check / Actions to take
It does not turn on at all. • Is the plug securely attached to the outlet?
• Make sure the outlet has power going to it, and ensure the plug
is secured.
• Is there a power outage?
• Check to see if other lights and electrical equipment are
working and try again.
It doesn’t work in Auto Mode. • Has Auto Mode been selected?
• Press the Mode button until Auto Mode is selected.
• Is the sensor blocked or clogged?
• Wipe Odour Sensor with wet cloth, then dry.
It vibrates and makes a lot of noise. • Is it running on a slanted or uneven surface?
• Move the unit to a hard, at, even area of the oor.
The power plug and outlet feel hot. • Is the plug securely plugged in?
• Make sure the plug is properly plugged into the outlet.
There is a strange smell. • Is it being used in a place with a lot of smoke, dust, or odours?
• Clean the air intakes on either side and clean the pre-lter.
• Clean or change the lter.
The fan strength is weak. The unit is not purifying the air. • Is the Check Filter indicator light on?
• Change the lters as required.
The display panel is dim. • Is the Light Sensor blocked by debris?
• When Auto Mode is on, Sleep Mode is automatically activated
when the Light Sensor detects that the room is dark.
UNIT SPECIFICATIONS
Model Name AUS-1050AZBU
Power Voltage 220 - 240 V, 50 / 60 Hz
Power Rate 35 W
Recommended room capacity 38.2 m2
Weight 7 kg
Dimensions 380 mm(W) x 208 mm(D) x 600 mm(H)
Replacement Filter FILTER GI, item : 1712-0090-01
• The exterior, design, and product specications may be changed without prior notice to improve product performance.
To Next Page
Loading...
Need help?
General
