USER MANUAL WINIX ZERO 4 AIR PURIFIER
Page 17
Particle Sensors Care
For optimal performance of the Particle Sensor, which detects airborne dust and ultrane particles, clean it every two
months. Clean it more frequently when the unit is running in a place with high dust levels.
1. Open the Particle Sensor cover.
2. Use a damp cotton swab to wipe the lens and in-
take area of the Particle Sensor.
• To clean the sensor area, use only water. Do not
use volatile substances such as alcohol or ace-
tone
3. Wipe away any remaining moisture with a dry cot-
ton swab.
4. Close the Particle Sensor cover.
• The Particle Sensors cover may be cleaned using
a vacuum cleaner
PARTICLE SENSOR CARE
To Next Page
Loading...
