USER MANUAL WINIX ZERO 4 AIR PURIFIER
Page 16
Cleaning the lter
Intervals between lter cleaning may vary depending on the air quality.
1. Use a vacuum cleaner or soft brush to clean the
Pre-lter. If it is excessively soiled, rinse in room
temperature water.
• Do not use detergent or soap.
• Allow the lter to dry for 24 hours or more before
using.
• If the pre-lter becomes damaged or in any way needs replacement: Please contact your local dealer
NOTICE :
• Do not use benzene, alcohol, or other volatile uids, which may cause damage or discoloration.
• The Pre-lter is reusable after cleaning, ensuring it is completely dry.
• Do not use hot water over 40oC or volatile uids such as paint thinner.
• After washing the lter, allow it to dry completely in a well ventilated area. Otherwise, it may develop a bad
odour.