USER MANUAL WINIX ZERO 4 AIR PURIFIER
Page 14
Removing Filters
Turn the unit power o before removing lters.
1. Remove the front panel by grasping its upper
edge and gently pulling forward.
2. Press on the Pre-lter tabs near the top of the l-
ter, release and remove.
3. Pull out the Deodorization lter and True HEPA
Filter.
Preparing New Filters
1. Remove replacement lters from protective plas-
tic wrap.
• Operating the unit without removing lters from
plastic wrap may cause abnormal noise, deforma-
tion, or re as a result of overheating.
NOTICE :
• For optimal performance, only Winix lters should be used with this unit.
To Next Page
Loading...
