English ZERO Pro
FILTER CARE
2. Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
※
The unit will automatically power off when front panel is opened.
①
Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
ˍ
To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
②
Press the tabs on the top edge to remove
the 1 Pre-filter.
③
First remove the 2 AOC™ Carbon Filter
and then the 3 , 4 True HEPA filter with
Cleancel™ by pulling on the numbered tags
at the top of each filter.
NOTICE
ˍ
For optimal performance, only genuine Winix filters should
be used with this unit.
To Next Page
Loading...
