English ZERO Pro
FILTER CARE
4. Cleaning the Pre-filter
Intervals between filter cleanings may vary depending on the air quality.
①
Use a vacuum cleaner or soft brush to clean
the Pre-filter. If it is excessively dirty, wash
with room temperature water.
ˍ
Use only water, do not use volatile
substances such as alcohol or acetone.
※
If the pre-filter becomes damaged
or in any way needs replacement:
Please contact your local
dealer
NOTICE
ˍ
Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
ˍ
The Pre-filter is reusable after cleaning.
ˍ
Do not use hot water over 104°F or volatile fluids such as
paint thinner.
ˍ
After washing the pre-filter, allow it to dry completely in a
wellventilated area. Otherwise, it may develop a bad odor.
To Next Page
Loading...
