IB70 Motherboard User Manual
41
Chapter 3 AMI BIOS SETUP
3.1 When and How to Use BIOS Setup
The BIOS Setup allows users to modify system configurations. To enter the BIOS setup,
you need to connect an external USB keyboard, press Del key when the prompt
appears on the screen during start up. The prompt screen shows only few seconds so
need press Del key quickly.
Updated BIOS version may be published after the manual released.
Check the latest version of BIOS on the website.
You may need to run BIOS setup utility for reasons listed below:
1. Error message on screen indicates to check BIOS setup
2. Restoring the factory default settings.
3. Modifying the specific hardware specifications
4. Necessity to optimize specifications
BIOS Navigation Keys
The following keys are enabled during POST:
Enters the BIOS setup menu.
Display the boot menu. Lists all bootable devices that are
connected to the system. With cursor ↑and cursor ↓and by
pressing <ENTER>, select the device used for the boot.
Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
The following Keys can be used after entering the BIOS Setup.
Select or execute command
To Next Page
Loading...