Wintec PP-82 - Specification; Printer Specification

WINTEC PP-82 User Manual
7
3 SPECIFICATION
3.1 Printer Specification
Item
Parameters
Printing
Printing method
Direct thermal line printing
Resolution
Default 203 dpi, 180 dpi can be emulated
Printing width
72mm（576dots）
Printing speed
Max. 250mm/s
Print density
Adjustable from degree 1 to degree 4
Printing Direction
Vertical and horizontal
Interface
Default
Built-in USB, RS232, LAN
Auto cutter
Partial Cut
Page mode
YES
Memory
RAM
2MB
Flash
4MB
Character set
Font
Font A:12*24 Font B:9*17 CHN: 24*24
Number of Columns
48/64
Alphanumeric
95
Expanded Character
128*47
Code page
47
Graphics
Support bitmap printing with different density and user defined
bitmap printing (Max. 64K for per bitmap, and Max. 256K for total)
Barcode
1D
UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR, CODE128,
CODE93
2D
PDF417, QR code
Detection
Sensor
Paper out, Cover Open