Wintec PP-82 - Troubleshooting; Printer Not Working; LED Indicator on the Control Panel and Beeper Alarm

WINTEC PP-82 User Manual
24
6 TROUBLESHOOTING
The printer is very reliable, but occasionally problems may occur. This chapter provides information on some
common problems you may encounter and how to solve them. If you encounter problems that you can not
resolve by yourself, please contacts your dealer for assistance
6.1 Printer Not Working
Description
Reason
Solution
LED does not light
Printer do not work
No power
Connecting the power supply
Not power on
Turn on the printer
Circuit board broken
Contact with the dealer
6.2 LED Indicator on The Control Panel and Beeper Alarm
Description
Reason
Solution
LED always on
Paper is going to run out
Reload a new paper
Error LED always on and beeper alarms
Printer Cover open
Close the printer cover
Paper Error LED always on and beeper
alarms
Paper end
Reload the roll paper
Error LED blinks and beeper alarms
Thermal print head
overheat
Turn the printer off and resume when
it cools
overvoltage
Print with specified voltage
Low-voltage
Print with specified voltage