Wintec PP-82 - Setting DIP Switch; Specification of LED Indication and Beeper; Specification of LED Indication; Beeper

WINTEC PP-82 User Manual
17
4.7 Setting DIP Switch
4.7.1 Specification of LED Indication and Beeper
4.7.1 Specification of LED Indication
Name
Status
Specification
POWER
LED
(Green)
ON
The printer work well
OFF
The printer powers off.
ERROR
LED
(Red)
Flash
The printer in an error state
OFF
The printer in a normal state
PAPER
LED
(Red)
ON
The printer in paper end state
OFF
The printer in a normal state
4.7.2 Beeper
Description
POWER
LED
ERROR
LED
PAPER
LED
Beeper
Cover Open
ON
ON
ON
“Beep ,Beep-,Beep”
Full of paper
ON
OFF
OFF
Silent
No Paper
ON
ON
ON
“Beep Beep Beep”.
Paper Near End
ON
OFF
ON
Silent
Cutter Jam
ON
Flash
OFF
”Beep-，Beep-”
Over-temperature
warning before stop
printing
ON
Flash
OFF
“Beep--,Beep,Beep--”
Over-temperature
alarm when stop
printing
ON
Flash
OFF
“Beep--,Beep,Beep--”
Low pressure alarm
ON
Flash
OFF
“Beep, Beep, Beep-”
High pressure alarm
ON
Flash
OFF
“Beep, Beep, Beep-”