Wintec PP-82 - Print Self Testing; Printing of Windows Driver Program

WINTEC PP-82 User Manual
18
Notes:
The printer uses a thermistor to detect the temperature of the print head. If the temperature of print head is more
than 65° C, the printer will send a warning. If the temperature of print head is more than 80° C, printer will stop
working until the temperature is in the normal range.
4.8 Print Self Testing
1) Make sure the printer has been installed the roll paper and turn off the top cover.
2) Make sure the printer has linked to power.
3) Make sure the printer power off.
4) Press and hold FEED button, then turn on power switch, the printer will print out self-test page.
4.9 Printing of Windows Driver Program
1) Install the Windows Driver program. (Please refer to the Windows Driver Manual)
2) Choose the “Interface”.
3) Use the Windows Driver Program to print out the “Self-test page”.