Winterhalter UC Series Manual

Table of contents
2
Commissioning regulation
for Winterhalter UC Series
1 Table of contents
1 Table of contents................................................................................................................................ 2
2 About these instructions ................................................................................................................... 2
2.1 Explanation of symbols used................................................................................................................ 2
3 Safety notes......................................................................................................................................... 3
4 Requirements...................................................................................................................................... 3
5 Checking the electrical installation .................................................................................................. 3
6 Connection diagram for mains connection cable........................................................................... 4
6.1 Connection diagram for Europe (except Belgium with 230V/3/PE)...................................................... 4
6.2 Connection diagram for Belgium (230V/3/PE) and Malaysia ............................................................... 5
6.3 Connection diagram for Australia ......................................................................................................... 5
6.4 Connection diagram for Japan.............................................................................................................. 6
7 Checking the plumbing installation.................................................................................................. 6
8 Checking the filter system................................................................................................................. 7
9 Putting the integrated water softener into operation...................................................................... 7
10 Rinse aid and detergent..................................................................................................................... 8
11 Programming the machine ................................................................................................................ 9
11.1 Selecting the language and entering the basic parameter set ........................................................... 10
11.2 Changing further parameters.............................................................................................................. 11
11.3 Machine without water treatment........................................................................................................ 12
11.4 Machine with TE or VE demineralisation system ............................................................................... 12
11.5 Machine with integrated softener........................................................................................................ 13
11.6 Entering addresses............................................................................................................................. 13
11.7 Date, time, ° Celsius / ° Fahrenheit; date of installation ..................................................................... 14
11.8 Summary of the changed parameters ................................................................................................ 15
12 Switching on the machine ............................................................................................................... 15
13 Venting the integrated dosing equipment...................................................................................... 16
14 Manual entries................................................................................................................................... 17
14.1 Date, time, ° Celsius / ° Fahrenheit; date of installation ..................................................................... 17
14.2 Water treatment.................................................................................................................................. 18
14.2.1 Setting the type of water treatment..................................................................................................... 18
14.2.2 Machine without water treatment........................................................................................................ 19
14.2.3 Machine with TE or VE demineralisation system ............................................................................... 19
14.2.4 Machine with integrated softener........................................................................................................ 19
14.3 Changing further parameters.............................................................................................................. 20
14.4 Entering addresses............................................................................................................................. 20
15 Instructing personnel....................................................................................................................... 21
2 About these instructions
2.1 Explanation of symbols used
The following symbols are used:
Danger
Warning of possible severe and even fatal injuries to people if the described precautionary
measures are not observed.
Warning
Warning of possible slight injuries to people or possible material damage if the described pre-
cautionary measures are not observed.
Caution
Warning of possible defects or irreparable damage to the product if the described precautionary
measures are not observed.
INFO
This provides useful information

Winterhalter UC Series Specifications

General

Model	UC Series
Category	Dishwasher
Energy Consumption	Varies by model and program
Type	Undercounter
Dimensions	Varies by model
Capacity	Varies by model
Wash Cycle Duration	Varies by program
Water Consumption	Varies by model and program
Noise Level	Varies by model
Detergent Dispensing	Automatic
Rinse Aid Dispensing	Automatic
Power Consumption	Varies by model
Dimensions (HxWxD)	Varies by model
Weight	Varies by model
Wash Programs	Standard, Intensive, Short