Wisenet HCP-6320HA User Manual (English)

Other manuals for Wisenet HCP-6320HA

Questions and Answers:

J
Jaime PerezAug 10, 2025
How to fix out of focus picture on Wisenet Security Camera?
- S
  samanthaobrienAug 10, 2025
  If your Wisenet Security Camera picture is out of focus, try the following: * Check if the dome cover or the camera lens is dirty; if so, clean it. * Consider the distance between the camera, the subject, and the surroundings, especially if the subject is against a white background. * If auto-focus is failing, switch to manual focus. * Restore the camera settings to default using the reset menu. * Adjust the sharpness level.
S
Susan MurrayAug 15, 2025
What to do if no picture is displayed on Wisenet HCP-6320HA monitor?
- C
  Crystal ThorntonAug 15, 2025
  If you are not seeing a picture on the monitor connected to your Wisenet Security Camera, make sure the power cable is securely connected to both the camera and the monitor. Also, check that the video cable is properly connected. If you are using a system controller, consult its operation manual. Ensure the iris of the lens is not closed by adjusting the iris menu. Finally, check and adjust the camera’s fixed shutter speed in the shutter menu.
H
Hannah DillonAug 20, 2025
How to eliminate digital noise in Wisenet HCP-6320HA picture?
- R
  Richard CantuAug 20, 2025
  If digital noise appears in the picture of your Wisenet Security Camera, ensure the video cable is properly connected and that the power and video cables do not exceed the recommended maximum lengths. Also, try adjusting the sharpness level.
T
Tracy RosarioAug 26, 2025
What to do if Wisenet HCP-6320HA Security Camera picture is too dark or bright?
- V
  Veronica ThompsonAug 26, 2025
  If the picture from your Wisenet Security Camera is too dark or too bright, adjust the camera’s Brightness menu.
L
Laura KimAug 30, 2025
Why does my Wisenet HCP-6320HA Security Camera display a white image?
- R
  Robert WatkinsAug 30, 2025
  If the monitor displays a white image from your Wisenet Security Camera, check if the iris of the lens is open and adjust the menu for the iris of the lens.
B
Brady AlvaradoSep 4, 2025
How to troubleshoot Wisenet Security Camera controller that does not work?
- L
  Lori CummingsSep 4, 2025
  If the controller for your Wisenet Security Camera is not working, check if the camera and peripheral devices are properly connected, and verify the setups of ID, protocol, and baud rates.

Wisenet HCP-6320HA Specifications

General

Camera Type	Dome
Sensor Type	1/2.8" CMOS
Lens Type	Varifocal
Max Aperture	F1.4
Video Compression	H.265, H.264, MJPEG
Network Interface	RJ45 (10/100BASE-T)
Ingress Protection	IP66
Resolution	1920x1080
Focal Length	2.8-12mm
Day/Night	Yes (ICR)
Wide Dynamic Range	Yes
Frame Rate	30fps @ 1080p
Power Supply	12V DC