What to do if the Wisenet XNF-9010RV connected to the network is not detected in the Device Manager program?
If your Wisenet Security Camera isn't being detected in the Device Manager program, try turning off the firewall settings on your PC and then search for the camera again.
Why can't I access my Wisenet XNF-9010RV from a web browser?
If you're having trouble accessing your Wisenet Security Camera from a web browser, here are a few things to check: * Ensure the camera's Network settings are correctly configured. * Verify that all network cables are properly connected. * If using DHCP, confirm the camera is successfully acquiring dynamic IP addresses. * If connected to a Broadband Router, check that port forwarding is properly configured.
What to do if of is set to , but no notification e-mail reaches me even when an analysis event had occurred with my Wisenet XNF-9010RV?
If you're not receiving notification emails for motion detection events on your Wisenet Security Camera, verify these settings in the following order: A. Check the settings. B. Ensure that is set to . C. Confirm that the option in the menu is selected.
What to do if the Wisenet Security Camera reports that NAS setting has failed?
If your Wisenet Security Camera reports that the NAS setting has failed, please check the following: 1. Confirm that the IP address of the NAS is valid. 2. Confirm that the ID/password of the NAS is valid. 3. Confirm that you can access the folder designated as the default folder using the ID of the NAS. 4. Confirm that the NAS SMB/CIFS items are unchecked. 5. Confirm that the NAS IP address and the camera IP address are in the same format. 6. Check whether you tried to access as another user without formatting the default folder saved or used. 7. Confirm that you used recommended NAS equipment.
What to do if the Micro SD card is inserted but the Wisenet Security Camera does not operate properly?
If your Wisenet Security Camera isn't operating properly with a Micro SD card inserted: * Check if the Micro SD card is inserted in the proper direction. * Format the Micro SD card again in ? ? menu; operation of Micro SD cards formatted by other devices is not guaranteed.
Why does the Wisenet XNF-9010RV Security Camera viewer got disconnected during monitoring?
If the viewer gets disconnected during monitoring with your Wisenet Security Camera, this can happen if connected viewers become disconnected upon any change to camera or network configurations. Check all network connections.
What to do if there is no video displayed when accessing the plug-in free webviewer on Safari via HTTPS for my Wisenet Security Camera?
If no video is displayed when accessing the plug-in free webviewer on Safari via HTTPS for your Wisenet Security Camera: * On the authentication popup window prompted when initially accessing https, click "View Authentication Certificate" and select the "Always trust when connecting to the designated webviewer IP" check box. * If the webviewer continues failing to display a video after you select "Next" on the message window below, press the command key + Q to exit the Safari browser, access again and follow the procedures stated above.
Why does the sound volume of microphone changes periodically when an Windows 10 user accesses the web viewer through Chrome or Firefox with Wisenet Security Camera?
If the sound volume of the microphone changes periodically when a Windows 10 user accesses the web viewer through Chrome or Firefox with your Wisenet Security Camera, install the High Definition Audio device (Windows Default Driver) or a third-party driver as the microphone driver.
Why is voice not recorded even though audio input settings are configured on my Wisenet XNF-9010RV?
If voice is not being recorded even though audio input settings are configured on your Wisenet Security Camera, ensure that you enable the check box in - .
What to do if images overlap on my Wisenet XNF-9010RV?
If images overlap on your Wisenet Security Camera, check whether two or more cameras are set to a single multicast address instead of different addresses.
General| Brand | Wisenet |
|---|---|
| Model | XNF-9010RV |
| Category | Security Camera |
| Language | English |
Essential safety guidelines for operating the network camera.
Important considerations and warnings before installing the camera.
Step-by-step guide for disassembling and reassembling the camera.
How to connect the camera directly to a LAN or DHCP modem.
Utilizing the Device Manager for camera setup and configuration.
Setting up port forwarding on the router for remote access.
Methods for connecting to the camera via IP address, URL, Bonjour, UPnP.
Procedures for setting the initial password and logging into the camera.
Solutions for common problems encountered with the camera.
To Next Page
