EN-19
BPM Core
v1.0 | July 2019
3. Place your arm on a table and keep it level with your heart.
4. Press the button to start the BPM Core.
The screen displays "START".
5. Press the button again to start a measurement.
Note: When you start a measurement, you can also select "Start x3" or
"ECG" by swiping the light trail on the right part of the screen. "Start x3" will
launch 3 blood pressure measurements in a row. "ECG" will only record your
electrocardiogram and stethoscope signal.
To Next Page
Loading...
