Withings Move - Dissociating your watch

EN-42
Withings Move
v1.0 | January, 2019
Dissociating your watch
Dissociating your Withings Move allows you to remove it from your account. Once
it is no longer linked to your account, it can be installed on another account or on
the profile of another user of your account.
Dissociating your Withings Move will not remove any of your data from
the Health Mate® app.
To dissociate your Withings Move, perform the following steps:
1. Press and hold the button of your Withings Move for 10 seconds. Workout
mode will start after pressing the button for about one second, but continue
pressing it until the watch vibrates 2 times.
2. Release the button. The activity hand goes to the 50% mark.
3. Press the button 5 times so that the activity hand reaches progressively the
0% mark. Please wait until the activity hand reaches each mark of the activity
dial before pressing the button again.
4. Your Withings Move has been correctly reset and the hands move to their
initial position.
5. Go to the Bluetooth settings of your mobile device and “forget” your
Withings Move (for iOS users only).
6. Open the Health Mate® app.
7. Go to Devices.
8. Tap Withings Move.