3.2 Requirements for the location
NOTICE!
Distortion of measurement results due to
unsuitable location!
There is a risk of the distortion of measurement
results if the following requirements for the
location are not complied with.
– Do not position the device and the test
object in the vicinity of heaters or open win-
dows.
– Do not expose the device and the test object
to direct sunlight.
– Operate the device on a level, horizontal sur-
face.
– Set up the device in a low-noise environ-
ment.
– Do no set up the device in the direct prox-
imity of electromagnetic radiation (e.g. as
caused by mobile telephones).
NOTICE!
Risk of material damage due to unsuitable
location!
There is a risk of a short-circuit or of damage to
the device electronics if the following require-
ments for the location are not complied with.
– Install the USB cable so that it cannot be
damaged by external influences.
– Never operate the device in an environment
with a high level of humidity.
Distortion of measurement results
Short-circuit or damage to the elec-
tronics
01.09.2020 Precision measuring device ChronoMaster 17
To Next Page
Loading...
Need help?
General
