1.2 Scope of delivery
The scope of delivery consists of the ChronoMaster and a USB
flash drive with the following contents:
• “Chronoscope Service” display software
• Software manual in German, French, English, Spanish and
Italian as PDF file
Information on the display software
Further information on the display software is
to be found in
Ä
Chapter 1.3 “Software”
on page 8 and
Ä
Chapter 3.3 “Installing the
software” on page 18 and in the corre-
sponding software manual.
The scope of delivery also includes:
• This document
• Calibration certificate
• Warranty information
• Dust cover
1.3 Software
The measurements are controlled using the “Chronoscope
Service” display software. It is provided on the supplied USB
flash drive.
Information on the display software
Information on installation and operation of the
display software is to be found in
Ä
Chapter 3.3
“Installing the software” on page 18 and in
the corresponding software manual.
1.4 Modes
The ChronoMaster provides various measuring modes that
can be set in accordance with the escapement type of the
watch to be tested.
Measuring modes
01.09.2020Precision measuring device ChronoMaster8
To Next Page
Loading...
Need help?
General
