4 Performing a measurement
4.1 Configuring measurement settings
The measurement settings are configured using the
“Chronoscope Service” display software.
The measurement settings are:
• Beat number
• Lift angle
• Measuring mode
• Integration time
• Display mode
Information in the software manual
Information on the measurement settings is to
be found in the corresponding software
manual.
Various programs are available with pre-defined measurement
settings.
It is also possible for you to create your own programs with
frequently used measurement settings.
Information in the software manual
Information on selecting and setting the pro-
grams is to be found in the corresponding soft-
ware manual.
4.2 Positioning the watch and starting a measurement automatically
NOTICE!
Distortion of measurement results!
There is a risk of the distortion of measurement
results if the watch or the clockwork is not
clamped correctly.
– Make sure that the watch or the clockwork is
clamped correctly.
Overview
Programs
Distortion of measurement results
01.09.2020 Precision measuring device ChronoMaster 21
To Next Page
Loading...
Need help?
General
