Information in the software manual
Information on the measuring process and on
controlling the measurement is to be found in
the corresponding software manual.
4.3 Controlling the measurement using control keys
To operate the software, the ChronoMaster has 4 control keys
(Fig. 17).
The following functions are assigned to the control keys:
No. Function
1 Program selection, select next lower program.
2 Program selection, select next higher program.
3 Restart current measurement.
4 Pause/continue current measurement.
Information in the software manual
Information on the individual functions is to be
found in the corresponding software manual.
Fig. 16: The measuring process
starts automatically
Fig. 17: Control keys
01.09.2020 Precision measuring device ChronoMaster 25
To Next Page
