5 Transportation and storage of the ChronoMaster
5.1 Shutting down the ChronoMaster
Requirement:
• The measurement has been finished.
1. Pull the clamping jaw outwards and hold it.
2. Remove the watch or clockwork from the microphone.
3. Carefully release the clamping jaw.
4. Disconnect the USB cable (Fig. 18/1) at the USB plug
from the USB port of the PC or tablet computer
(Fig. 18/2).
5.2 Transportation and storage of the ChronoMaster
NOTICE!
Risk of material damage due to improper trans-
port!
In the event of improper transport, the device
may fall or topple. This can cause significant
material damage.
– Transport the device in its original packaging
only.
– Always transport packages upright and
never throw them.
– Only transport the device when it is shut
down.
– Transport the device with two hands only.
Fig. 18: Shutting down the Chrono-
Master
Improper transport
01.09.2020 Precision measuring device ChronoMaster 27
To Next Page
