Daylight saving time (DST)
Languages (only refer to day of week)
Alarm function
The base unit allows you to set two different alarm times. For example, you can set an alarm for the
morning and for after an afternoon nap by activating both alarm times.
1. Use the button to select the desired alarm time (A1 or A2).
2. Hold and press the button for approx. 2 seconds once you have chosen the desired alarm time.
The hour indicator of the alarm time (A1 or A2) will flash.
3. Set the desired hour for the alarm with the and buttons.
4. Press to store the setting. The minute indicator will flash on the display.
5. Set the desired minute for the alarm with and buttons.
6. Press to store the setting. The alarm time is set and activated.
Switching the alarm on and off
Use the button to switch the alarm on and off.
• press once: on the display, A1 is activated
• press twice: on the display, A2 is activated
• press three times: and on the display, A1 and A2 is activated
• press four times: and disappear, A1 and A2 is deactivated
Stopping the alarm
You will be woken by the alarm at the set time, and the sound will become more and more intense as the
alarm continues.
• Snooze - Press the SNOOZE/LIGHT button to stop the alarm for approx. 5 minutes.
• Switch off the alarm completely - Press any button on the base unit (apart from SNOOZE/LIGHT), to stop
the alarm. The alarm will go off again after 24 hours.
• Automatic stop function- If you do not press any buttons, the alarm will automatically switch off after 2
minutes. The alarm will go off again after 24 hours.
Snooze function
Press the SNOOZE/LIGHT button once when the alarm sounds.
To Next Page
Loading...
