Wittkopp SmartCam - Changing Operation Mode;Number

5
SmartCam
4 Changing operation mode/number
In case of changing the operation mode/number all user codes will be deleted.
Master code, administrator code and facility-master code remains valid.
Changing the operation mode/number is only possible when the lock is opened.
 
1.
Press and hold the key “6“ for approx. 3 seconds.
When releasing the key the green LED lights up permanently.
6
2.
Enter your 6-digit master code e.g.
123456
3. Enter the 2-digit number e.g.
11
4.
Re-enter your 6-digit master code e.g
123456
5. Re-enter the 2-digit number e.g.
11
6. The new operation mode/number is accepted.