32
Trap Version
SNMP Trap version 1 and 2 are both supported. Select
your preference.
Trap Activity
Sent on redirect
Send a trap to the Trap Receiver (already defined in the
Trust Trap IP) when a station (wireless client) is
redirected to the default web site.
Sent on Auth Success
(Authorization success)
Send a trap to the Trap Receiver (already defined in the
Trust Trap IP) when a station (wireless client) gets
authorization from the 802.1x server (or RADIUS server).
Sent on Auth Failure
(Authorization failure)
Send a trap to the Trap Receiver (already defined in the
Trust Trap IP) a wireless client fails to get authorization
from the 802.1x server (or RADIUS server).
Sent WEP key failure
Send a trap to the Trap Receiver (already defined in the
Trust Trap IP) when a wireless client fails to associate to the AP because of wrong WEP keys.
Sent on acct failure
Send a trap to the Trap Receiver (already defined in the
Trust Trap IP) when the accounting server of a wireless client is invalid or fails.
Sent on boot
Send a trap when the AP has booted.
Sent on reboot
Send a trap when the AP is asked to reboot itself.
Sent on web start
Send a trap once the AP web server is ready for use.
To Next Page
Loading...