WMF 1500S+ - 4.10 System; Cooler; Hot Foam Proportion; Progress Indicator

60
User Manual WMF1500 S +
Software | System
4.10 System
Cooler
Milk storage temperature
Enter the milk storage temperature here.
For example, < 8°C when using Cup&Cool.
Empty message
This setting determines whether amilk empty message
will be shown. The empty message can be coupled
with abeverage lockout. This is especially important
for self-service mode, so that paid beverages are
guaranteed to be dispensed completely.
Temperature sensor
Measurement of milk temperature.
Hot foam proportion
Options: very little, little, middle, much, alot
Default value: little
Progress indicator
Options: Line, circle, off
Default value: Line
DI_system
Cooler
DS_04_10_01
Possible with optional Cup&Cool
with temperature monitoring.
Hot foam proportion
DS_04_10_08
Progress indicator
DS_04_10_02